There Are 85 Things You Need To Know Before Removing The Moen Shower Head Flow Restrictor.

This time around, we shall cover How To Remove Moen Shower Head Flow Restrictor. Obviously, there is a great deal of information on What Does A Moen Flow Restrictor Look Like on the Internet. The fast rise of social media facilitates our ability to acquire knowledge.

Moen Shower Head Flow Restrictor Replacement-related material is also connected to Moen 2.5 Gpm Flow Restrictor and How to Remove a Water Restrictor From a Shower Head. As for further searchable items pertaining to What Does A Moen Flow Restrictor Look Like, they will likewise have anything to do with Are All Moen Shower Cartridges The Same?.

85 Things You Should Know About How To Remove Moen Shower Head Flow Restrictor | What Does A Moen Flow Restrictor Look Like

• Of course, if after removing the flow restrictor, you find that the water pressure is still low, then you have another problem entirely. Many factors can contribute to low water pressure. Determining why your water pressure is weak begins with a plumbing system evaluation. If you’d like to arrange such an evaluation, call us at 216-365-0600. We’ll assess your situation and give you a recommendation for solving the problem. - Source: Internet
• Moreover, different flow restrictors will have different colors. By and large, the material used to make the flow restrictors can withstand high water temperatures. They are also easy to remove or replace. - Source: Internet
• Now that you have the screen and the ring out of the way, it should be easy to see the water flow restrictor inside the plastic ring. Take the paper clip in your tool kit, place it under the water flow restrictor, twist lightly, then pry and remove the restrictor. You can also use needle-nose pliers or a screwdriver in the place of the paper clip. - Source: Internet
• Once you have removed the rubber O-ring Gasket, you can easily spot the flathead screw where the flow restrictor is attached. This screw is the main hurdle in taking out the flow restrictor successfully. So, it should be removed first to remove the flow restrictor easily. - Source: Internet
• Take out the water saver: After removing the head, you must take out a seal and screen or mesh filter. You can remove the restrictor after taking out these two components. A plier is perfect for removing the seal. Tap the head on your palm to take out the screen. Use a flat screwdriver to detach the restrictor. - Source: Internet
• Step 5: Reattach the shower head : Place the shower head back on the end of the pipe, securing the connector nut initially by tightening it with your hand. Once it’s snug, wrap the clean rag around the nut. Secure the shower arm using the pipe wrench, and tighten the nut using the adjustable wrench. - Source: Internet
• Step 3: Extract water restrictor : Using a flathead screwdriver, remove the water restrictor. In some cases, the water restrictor is found inside the end of the holder where it connects to the flexible pipe. Use the steps above to remove the connector nut there to gain access to the washer, screen, and water restrictor. - Source: Internet
• Reassemble the showerhead: Place the screen and washer to their designated places. Then, remove the existing Teflon tape from the shower arm threads and apply new ones in a clockwise direction. Afterward, attach the showerhead using your hands. You can use the wrench if required. - Source: Internet
• The primary function of the water flow restrictor is to conserve water. Therefore, by following this step-by-step guide and removing the restrictor, you’ll increase your water pressure. However, remain mindful of the amount of water usage. - Source: Internet
• In the United States, regulations state that every showerhead in your home must not produce more than a flow of 2.5 gallons of water per minute. As a result, manufacturers either place a water flow resistor valve to control the water flow from your shower head or design and set the showerhead itself to control the water flow. - Source: Internet
• Removing a flow restrictor is not a process you can expect to be done in a matter of minutes. If you’re doing it for the first time, it will take extra time than usual to complete. So, don’t rush to finish the work in a few minutes. - Source: Internet
• Do you have a handheld shower? You can find the flow restrictor on its handle’s edge where the hose is connected. It might be fitted behind the showerhead or inside the bottom or top of the flexible hose. Check the manufacturer’s manual if you cannot find the flow restrictor. - Source: Internet
• Now you will see a rubber O-ring gasket on the showerhead’s neck. Take the ring out using your hands. Do not use a plier or screwdriver because these tools can damage the gasket. Then, turn the showerhead’s neck in your palm and shake the internal screen to loosen it. Put the gasket and mesh aside. - Source: Internet
• Once the showerhead has been removed, you will now see an O-ring Gasket attached to the showerhead’s neck. You have to take it out using your finger. You can remove it with the help of a screwdriver, but as it is a sensitive object, we recommend taking it out with your hands. - Source: Internet
• Step 1: Shower head removal : Start by removing the shower head. To do this, wrap a clean rag around the shower arm and connector nut. This helps protect them from getting scratched. Holding the arm firmly with a pipe wrench, loosen the nut with the aid of an adjustable wrench. - Source: Internet
• Step 2: Washer and screen : After you’ve removed the shower head, look for the washer inside of the connector nut. The washer is designed to create a seal to prevent leaks while also holding a filter or screen in place. You need to remove both to access the water restrictor. - Source: Internet
• Water flow restrictors help to conserve water and energy. Therefore, you’ll reduce your bills and save water at the same time if you choose to use a water flow restrictor. Additionally, new showerhead models are set in a way that allows your water flow restrictor to offer you the right amount of water pressure. This means you have a choice on how you can use your fresh water. - Source: Internet
• Now comes the main task of removing the flow restrictor from the showerhead. Use the screwdriver again to remove the flow restrictor gently. You have to pay much attention when taking out the flow restrictor. - Source: Internet
• With the help of a screwdriver, insert into the corner tip of the flow restrictor. Now to locate the flow restrictor, it is the flat plastic piece in the shower head neck with several small perforations that looks like an aerator on a faucet. Now, apply gentle pressure with a rotary motion. Make sure that you do not rotate it too hard as it can damage the flow restrictor. If the shower head does not have a flow restrictor, then simply remove it. - Source: Internet
• Step 3: Extract water restrictor : You can extract the water restrictor by gently removing the washer with a pair of needle-nose pliers. You can then tap the bottom of the head against your hand to remove the screen. Using a flat head screwdriver, remove the water restrictor, which should now be visible. - Source: Internet
• Step 1: Shower head removal : If your handheld shower head is attached to the bottom of the handle, it’s a simple task of removing the shower head. Make sure to protect the connector nut by wrapping it in a clean rag. While firmly holding the nut with adjustable pliers, rotate the head counterclockwise to loosen it. - Source: Internet
• Although the laid-out steps can easily aid you to perfectly remove a flow restrictor from a Moen showerhead, it is to know that during your attempts there might be some few challenges here and there especially for an individual who is not quietly good working with tools. However, with the listed tools mentioned above, handling of the whole procedure should be easy. Make sure to also close all water faucets and shower heads are completely drained off water before commencing on the procedure. - Source: Internet
• Nonetheless, you can remove your water restrictor to increase water flow in your shower head. So today, we’re looking at a step-by-step guide on how to remove a flow restrictor from a handheld showerhead. But first, let’s define a flow restrictor. - Source: Internet
• Once the mesh screen is removed, check to confirm whether your shower head has a rubber gasket. If present, you should remove it using the paperclip. However, it would be best if you were careful here because the O ring is easily damaged. In case of damage, ensure you get a replacement before reassembling your shower. - Source: Internet
• In fact, taking a shower from a dirty or contaminated showerhead could be hazardous. As you daily use your showerhead for bathing, it is exposed to dust, dirt, and germs that in a long run hid in the showerhead and later released along with water back to your skin. So as a measure to prevent harmful bacteria from entering and living in your showerhead, always clean it from time to time with some old fashion vinegar. One good factor of using a Moen showerhead is being able to clean the showerhead and reusing whether is attachable or detachable showerhead. - Source: Internet
• Note: If you find it difficult to remove the flow restrictor from the showerhead. We recommend hiring an expert to get the job done. The showerhead is sensible; you may damage it whimsically. - Source: Internet
• After successful removal of the water saver, reinsert the screen and O-ring gasket inside your shower head. Then, unwrap the old plumber’s tape from the shower arm thread and apply new tape. Afterward, insert the showerhead into its hose and rotate the head using your hands. - Source: Internet
• Once the screen is removed, you’ll see a rubber O ring gasket. You should carefully remove it using the paperclip. However, it would help if you were careful here because the O-ring is easily damaged. In case of damage, ensure you get a replacement before reassembling your shower. - Source: Internet
• A common type of shower head in many homes, the embedded shower head is attached directly to the pipe that comes out of the wall . Screwed into place, it’s easy to remove the water restrictor from this type of shower head. Here’s how. - Source: Internet
• A component designed to limit the water flow within 2.5 gallons per minute is called a flow restrictor. It’s an excellent concept, but not for regions with low water pressure. - Source: Internet
• Use a clean cloth or towel to protect the connector nut. Use the adjustable pliers to hold the covered nuts in place and start to rotate counterclockwise. You can then remove the showerhead from the showerhead handle. - Source: Internet
• A: This is a common issue with shower heads. The most likely cause of this is that the water pressure in your home is too low. You can try to fix this by turning up the pressure on your shower head or by installing a new one. - Source: Internet
• A flow restrictor is a flat and circular item built using plastic. It has a metal center, which is generally star-shaped. You can find this component behind the screw attachment part of our showerhead. Its opening is very close to the edge. - Source: Internet
• Carefully place a cloth on top of the shower head connection while securely tightening the jaws with an adjustable wrench. With one hand, secure the shower pipe near the shower wall and in a counterclockwise direction turn the shower head connector using the adjustable wrench. Reattach the shower head with shower hose and tighten the connection by hand. Once it is secure, then use a pipe wrench to finish tightening. This should be done after you turn on the water and check for leaks. - Source: Internet
• Use the wrench to tighten the showerhead. Make sure not to use the wrench so hard as it may break the pipe or connector. Be smooth and gentle with the tools. - Source: Internet
• Yes, you can if you have an adjustable shower head. All you need to do is set the water flow how you prefer it, and you are good to go. Also, you can clean your Moen shower head to remove the buildup of hard water. - Source: Internet
• Suppose the needle nose pliers and the paper clip fail to remove the restrictor valve. In that case, sink your screwdriver in one of the holes in the restrictor valve. Turn the screw to loosen the valve and then pull the water flow restrictor out. - Source: Internet
• Be meticulous throughout the process. Patience and taking time will ensure you do not make any mistakes. If you notice leakage after reattaching the showerhead, ass more tape on the shower arm to tighten the seal. - Source: Internet
• Not every showerhead has a water flow restrictor. However, new models do have the restrictor as per the laws in the nation. The National Energy Act does oblige every manufacturer to include a removable water flow restrictor in the showerhead. - Source: Internet
• If you cannot change the water pressure, consider opting for an amplifying showerhead. The amplifying showerhead is meant to conserve water as it increases the velocity of the water when it passes through the showerhead. Using only 1.5 gallons per minute, it can simulate a 2.5-gpm flow through the showerhead. - Source: Internet
• Removing a flow restrictor is a straightforward process and can be done easily without complications. We have explained the process in a step-by-step guide below so you can understand them thoroughly. Let’s take a look at them. - Source: Internet
• A: The flow restrictor is a small metal disc that sits on top of the faucet and limits the amount of water that can come out. To remove this, you must first turn off the water supply to your sink by turning the knob at the bottom of your sink counterclockwise. Then, you will need to unscrew the nut holding in place the flow restrictor with a wrench or pliers. After removing it, simply rinse it off and put it back on. - Source: Internet
• Take care not to damage the gasket as you do so. Remove the flow restrictor, which is a plastic disc that covers the shower head inlet located behind a star-shaped metal piece in the shower head. Hook the paper clip under one section of the flow restrictor and twist it to pry up and remove the flow restrictor. - Source: Internet
• Most shower heads, like the Moen showerhead, have threads. Therefore, if you accidentally damage the threads in the removal process, it will become impossible to adjust the showerhead. This means you must remain careful as you remove the shower head flow restrictor and throughout the process, especially if you’ll be using a wrench. Also, you should continually pay attention to the shower diverter gate pipe that is fixed on the wall. Hold it in place to prevent it from breaking or moving. - Source: Internet
• The type of water in your area. For instance, it’s easier to get a clogged shower head if you have salty water than if you have fresh water. Since clogging damages the restrictor, you’ll require more replacements in such salty regions. - Source: Internet
• There is a federal law about how showerheads are made – and they can deliver no more than 2.5 gallons per minute. The point of the water-saving device is to save water, they are no laws that would make removing it illegal. - Source: Internet
• Below is the distributor showing the little green plastic part that looks like one of the parts from a faucet aerator. I’m guessing it acts like a primary water flow distributor and a flow restrictor. You can simply push this out the bottom of the ball swivel with a little screwdriver. - Source: Internet
• A water flow restrictor is usually a flat, circular, plastic piece. The center of the restrictor is shaped like a star, or similarly shaped, and comes in a variety of colors. It’s found behind where the shower head screws off of the pipe coming out of the wall or at the end of the flexible hosing of a handheld shower head. - Source: Internet
• A: To clean a shower head with hydrogen peroxide, first remove the shower head from the wall. Next, fill up a spray bottle with hydrogen peroxide and soak a rag in it. Then, use the rag to wipe down the shower head. Finally, rinse out the spray bottle and put it back on the shelf. - Source: Internet
• Yes. Water is already a limited resource. Therefore, removing the restrictor prevents you from conserving water. Additionally, the more water you use, the more extra cash you’ll have to pay. - Source: Internet
• Indeed, there are times that you did be having a nice cold bath and notice the flow of water from your Moen shower head has little or no pressure. We all have the amount of pressure we did like water to flow on us while taking that cozy bath, so when you start noticing a slight change you tend to feel like you are not enjoying your showers any longer. When this happens, chances are the flow restrictor is clogged. Most often manufactures, including Moen place flow restrictors in the neck of shower heads to prevent waste of water and conserve. These flow restrictors, although handy can sometimes give you a nightmare in the bathroom and clogging is one of them and when problems such as clogging are not looked in to or properly handled, can lead to you buying a whole new set of shower heads. - Source: Internet
• Once you start removing the showerhead, if you find that the connecting nut is not moving, refrain from using too much pressure. Check to see whether the thread on the showerhead is rusty. If rust is present, apply rust remover first and leave it for 30 minutes before removing the showerhead. You can also use some silicone spray to lubricate the showerhead. - Source: Internet
• Once open, check whether the water flow restrictor is at the top or bottom of the hose. For instance, the restrictor is usually at the bottom part of the Waterpik shower head. Then take the paper clip in your tool kit, place it under the water flow restrictor, twist lightly, then pry and remove the restrictor. You can also use needle-nose pliers or a screwdriver in the place of the paper clip. - Source: Internet
• The Moen Magnetix shower head is a feature-rich product with an elegant, modern design. It includes five different spray options and many other functions that make it stand out from the competition. However, the most interesting part of this shower head is its $300+ price tag! If you are thinking about buying one but would rather spend your money on something else in your budget or just want to take advantage of some great deals online, then read through these steps for removing the magnetism inside. - Source: Internet
• You will see a rubber O ring gasket in the shower head, gently remove it with your fingers. Note that removing the O ring gasket with anything other than your fingers could easily damage it due to its delicate nature, so restrain from the use of pliers or screwdriver. With the shower head placed facing the palm of your hand, shake the screen loose till it is out of the shower head and carefully place both the screen and the O ring aside. - Source: Internet
• Before you place the shower screen back into the showerhead, clean it by running it under some freshwater. This should remove any of the dirt that has been filtered into the shower over time. If it has a lot of dirt, soak the shower screen in four parts water and one part vinegar mixture. This should get rid of any stubborn stains. - Source: Internet
• Do you see the flow restrictor now? It’s a flat plastic-made component with multiple small perforations, similar to an aerator. Use a flat head screwdriver to remove the water saver. Insert the corner edge of the screwdriver to the middle of the restrictor and remove it. Do not apply extra force. Otherwise, the screwdriver might damage the inner threads of your bathing head. - Source: Internet
• Get a partner to help you through the process. We’ve mentioned that you need to be careful. Therefore, a second individual will help you with tasks like holding the pipe on the wall and removing the water flow restrictor. - Source: Internet
• American showers changed forever when congress passed the Federal Energy Policy Act of 1992. This legislation stipulates that all faucets and fixtures made in America restrict water flow to a maximum of 2.5 gpm (gallons per minute) at 80 psi (pounds per square inch, a measure of water pressure), or to 2.2 gpm at 60 psi. - Source: Internet
• Remove the front plastic or metal cap from your showerhead. In some cases it will be secured in place by a few retaining latches. Disengage the latches with a flat-head screwdriver or your fingers. Or, just unscrew the cap with your hands. - Source: Internet
• This is because the low flow of water is due to a clogged flow restrictor. Or, instead, you can remove it if still failing in providing desired results. In the end, it’s your own decision to make keeping your needs in mind. - Source: Internet
• Using the screwdriver, gently pry the flow restrictor out of the shower head neck. A heavy precaution is advised here to move with care around the inner threads of the shower head as the least thing can cause the threads to be damaged. Once the flow restrictor is removed, place it into a container filled with vinegar. Let it soak for about 20 minutes. - Source: Internet
• If you wish to increase the water pressure in a Moen shower head, remove its flow restrictor. But, be ready to see a rise in your utility bills. Apart from that, be careful while removing this component. Otherwise, you might damage its threads. - Source: Internet
• A: The Moen handheld shower head is a bit more complicated than the average shower head. To take it apart, you will need to remove the screws on the back of the unit with a screwdriver and then unscrew the two caps that are located on either side of the water flow control valve. Once these are removed, you can pull out the old cartridge from inside and replace it with a new one. - Source: Internet
• Now screw the plastic spray cap back on to the distributor. Make sure you get it on all the way or the shower won’t spray right. Put the Phillips screw back in the center and snap the little plastic trim cap in place and you’re done. - Source: Internet
• According to National Energy Act demands all shower head manufacturers add a flow restrictor to their products. It’s because this component can reduce your utility bills. Hence, all the brands ship their shower systems with a flow restrictor to save water and reduce bills. - Source: Internet
• Now you are ready to screw the showerhead back in its place. Use a clockwise motion and make sure you have a tight seal using the wrench. However, do not over-tighten the showerhead. You can turn the water on to ensure there are no leaks. - Source: Internet
• A: To clean a Moen handheld shower head, you should first turn off the water and remove the sprayer. Then use a soft cloth to wipe down the outside of the unit. Next, take a small amount of dish soap and run it through the sprayer until it is completely soaked. Finally, rinse with warm water and allow to air dry before using again. - Source: Internet
• It is a recommended practice to help you complete the process easily. Turning on the water while removing the restrictor will do no favor but will result in making your task more complicated. So, turn off the shower water supply before starting. - Source: Internet
• Also known as flow limiters, these plastic devices are designed to limit the amount of water that flows through the showerhead. It is usually flat, circular, with a star shaped hole metal center. There are two primary types of shower heads, the fixed shower head, and the handheld shower head. - Source: Internet
• In both cases, you may need to remove the flow resistor of the showerhead to solve the issue. Remember, removing a flow resistor may increase the water pressure, but it can result in the non-conservation of water. This change can cost you paying high water bills. - Source: Internet
• You now place back the screen into the shower head and insert the O ring firmly against the screen making sure all is tight and secured. For it to be more tighten and secured, wrap plumber tape around the shower arm threads. Thread the Moen shower head back to the shower arm so that you are not able to turn it by the hand. - Source: Internet
• Now, turn the wrench in an anti-clockwise direction to easily disassemble the head. Be careful when you’re turning the threads of the showerhead. Detach the showerhead - Source: Internet
• The last step is to turn on the water supply of the showerhead to check for any leakage or damage. If everything is alright, you’re good to go. You might see a considerable improvement in water pressure flow from the showerhead. - Source: Internet
• Step 5: Reattach the shower head : Next, remove and replace the Teflon tape. As a final step, place the connector nut back on the handle or flexible pipe and hand tighten it. Wrap the connector nut in a clean rag, and secure it in place by turning it a quarter turn with the adjustable wrench. - Source: Internet
• Wrap a piece of rag around the spot where your shower head is connected with its hose. Place a wrench over the rag and tighten its jaws. Use one hand to grab the pipe so that it does not rotate while you loosen the connector. Start turning the wrench counterclockwise to disconnect your shower head from its hose. - Source: Internet
• You can use the wrench if required. Place the rag before using it. Hold the showerhead with one hand and rotate the wrench to tighten the head. Turn on the water flow to see the change. The water flow should be higher now. - Source: Internet
• Even soaking your shower head or faucets for more than 15 minutes puts their finish at risk. Vinegar may be a mild acid, but it’s an acid nonetheless. Prolonged exposure to vinegar will damage chrome finishes by eating the finish right off of your fixtures. - Source: Internet
• A: Anti-scald shower valves are designed to prevent the water from scalding you when it comes out of the shower. They work by using a pressure switch that turns off the water when it senses that there is too much pressure in the system. The valve then releases the excess pressure and allows for a normal flow of water. - Source: Internet
• Knowing how to fix various problems in your bathhouse at home does indeed grant you a tremendous amount of peace to enjoy. After all, you do not want your wife constantly complaining about how bad the whole house is and how she is most importantly not getting the relaxing showers she needs after her long day’s work, or even worse get that hunk plumber across the house to come fix the minor issues you do not know how to. Now knowing how to remove a flow restrictor from Moen shower head would be an easy way of preventing any of the above situations. - Source: Internet
• With the help of the cloth, again laid over the connection, hold the shower arm and gently turn the connections another three-quarter turn with the adjustable wrench. With this last step done, you have been successfully been able to remove a flow restrictor from a Moen shower head and pieced everything back together. If you are having a problem with the pressure of your shower, this is a great and easy fix. If you can get over the pain of disassembling your shower head, it is a simple process to remove the flow restrictor from a Moen shower head. - Source: Internet
• Now to put the whole thing back together. First put the green restrictor back into the ball swivel. Simply stick it down in and push it till it seats. - Source: Internet
• Use a clean rag or towel to protect the showerhead connector nut. Use the adjustable pliers to hold the covered nuts in place and start to rotate the showerhead counterclockwise. You can then remove the shower head handle from the tube. - Source: Internet
• We moved from IL to CO in August and bought a 30 year old house. I’ve been spending my time going through the house fixing and debugging. One the my pet peeves has been the wimpy stream of water in the shower. The city water pressure out here is well over 150 psi so there’s a pressure regulator in the house set at 70 psi. There’s no excuse for a poor stream of water in the shower. - Source: Internet
• Clogged materials can also be found in the shower head once the flow restrictor is removed. With the aid of your hand, gently remove any foreign material that may be preventing the direct flow of water through the shower head. There are times too that after removing the flow restrictor your whole showerhead might malfunction, this would be mostly due to the damage to the pipeline that water passes through from the faucet to the showerhead. Replacing it with a new one would be the best thing to do in this case. Therefore, knowing how to clean a Moen showerhead is quite necessary too. - Source: Internet

Here are some recommendations for locating information about how to remove flow restrictor from moen eco performance shower head to get you started: - Research how to remove moen shower head flow restrictor-related information from credible sources. This includes libraries, websites, and even journalistic professionals. - When researching can you remove moen shower head flow restrictor, it is vital to be aware of the numerous sorts of electronic media sources, such as Google and YouTube. Social media networks, such as Facebook and Twitter, are also likely to include information on How To Remove Flow Restrictor From Moen Shower Head.

Video | How To Remove Moen Shower Head Flow Restrictor

To obtain the most accurate information on How To Remove Flow Restrictor From Shower Head, it is essential to investigate the credibility of each source by reading.

This page contains multiple Moen Shower Head Flow Restrictor Replacement-related films from a variety of sources, which can expand your understanding about how to remove flow restrictor from moen eco performance shower head. Internet is an excellent resource for getting information on a range of subjects.

## Here are some crucial aspects concerning Remove Flow Restrictor Handheld Shower Head:

• How To Remove Moen Shower Head Flow Restrictor
• How To Remove Flow Restrictor From Moen Shower Head A112.18.1M
• Can You Remove Moen Shower Head Flow Restrictor
• How To Remove Water Flow Restrictor From Moen Shower Head
• How To Remove Flow Restrictor From Moen Handheld Shower Head

With so many websites and forums giving Removing Flow Restrictor From Moen Shower Head-related information, it is not difficult to locate what you want.

This is a highly unconventional method for obtaining knowledge on How To Remove Flow Restrictor From Moen Shower Head, compared to what most people are accustomed to. It permits a more in-depth examination of the content and application of information regarding Is It Illegal To Remove Flow Restrictor. Methods for creating aesthetically pleasing and informative presentations of Moen Flow Restrictor information. They can be utilized in business and marketing environments to convey messages regarding Moen Flow Restrictor. Consequently, we additionally supply photographs regarding How To Remove Flow Restrictor From Moen Handheld Shower Head.

This article concludes by providing an overview of how to remove flow restrictor from moen handheld shower head. In addition, How To Remove Water Restrictor From Moen Shower Head? and What Does A Moen Flow Restrictor Look Like are discussed to compare your understanding of How To Remove Water Restrictor From Moen Shower Head?.